Gimbal motors?

Discussion in 'Mavic 2 Drones discussion' started by Anthonyw, Aug 10, 2019.

  1. Anthonyw Airman

    Joined:
    Aug 10, 2019
    Messages:
    2
    Likes Received:
    0
    So i posted on another forum aboit having my first accident and that it damaged the gimbal. Pictures:

    https://drive.google.com/file/d/1-QvpYpuQ-ESMiyk9oVEF7x-37pDEGiuB/view?usp=drivesdk

    https://drive.google.com/file/d/1-Z5CkJ4HEgkIefwy2p9-wBksMhToDiSq/view?usp=drivesdk

    https://drive.google.com/file/d/1-KDmczG0a7yOsn76hQ4QDPg_-AnEVZbO/view?usp=drivesdk

    Those are pictures of how the gimbal acts at all times now. If i move it, it'll immediately move back to that position. When using the DJI GO APP, the gimbal status is N/A and it does not allow me to move it at all by using the screen or remote.

    When the drone starts up though, the gimbal does the calibration movements just fine.

    What could be causing this? I thought about putting on new a gimbal motor arm but the fact that during the boot up it moves fine, has me thinking i could be wrong.

    Any advice?
     
    #1
  2. Thunderdrones Moderator Staff Member

    Joined:
    Jun 5, 2019
    Messages:
    55
    Likes Received:
    53
    Does the gimbal center itself upon startup?
     
    #2
  3. Anthonyw Airman

    Joined:
    Aug 10, 2019
    Messages:
    2
    Likes Received:
    0
    Yes, It'll do the boot up with the gimbal moving back and forth, end at the center position, but then move into the angled position like in the first picture.

    Which is why I'm confused on what it could be. It'll do all that fine and then just like give up.
     
    #3

Share This Page